Questions tagged [plugin]
The plugin tag has no usage guidance.
89 questions
0
votes
1
answer
7
views
hop.nvim: using :HopWord with operators?
(I'm using https://github.com/smoka7/hop.nvim)
It says in the documentation "Use it with commands like v, d, c, y" but with the sample init.lua config below, It doesn't work. I mapped the , ...
- 339
0
votes
1
answer
10
views
filetype not set for current buffer after restoring session with persistence.nvim
I have an autocmd like this one to restore a session using persistence.nvim, but after doing so the filetype for the current buffer is not set (preventing features like syntax highlighting). filetypes ...
- 339
1
vote
1
answer
68
views
Setting root directory for projects and autochdir if file is not inside a project?
I just did a bunch of searching, and basically I want to be able to declare root directories for project (ideally on-the-fly with : commands rather than in my config file), (which I can do with ...
- 339
0
votes
0
answers
46
views
Make Neotree show every buffer like :ls?
https://github.com/nvim-neo-tree/neo-tree.nvim
I have a autocmd in Neovim that does :Neotree buffers dir=/ to show all my buffers, however buffers don't show up in the list until I switch to them, so :...
- 339
0
votes
2
answers
50
views
Running commands before saving sessions with persistence.nvim?
https://github.com/folke/persistence.nvim
The readme just lists events to be called without further explanation. PersistenceSavePre would be the one before saving a session. I looked at this issue ...
- 339
0
votes
0
answers
77
views
How can I change the looks of Noice.nvim elements?
I went through the documentation and it doesn't seem very clear. For instance, I want to try remove the "cmdline" title in the command box.
I looked at the views section and it seems like ...
- 339
0
votes
0
answers
30
views
Neovim: A combination of Edgy Neotree and Aerial causes this automatic shrinking
When I open Neovim, Aerial is focused and when I focus on the file, the height reduces. I looked through the documentations of those three plugins but can't figure out what is going on. The issue ...
- 339
0
votes
0
answers
28
views
Trigger Luasnips with hotkeys / programatically?
I have this in my init.lua, I looked up how to trigger it programmatically including these discussion posts and the documentation, but couldn't figure it out. This is my Luasnip config
local ls = ...
- 339
1
vote
3
answers
52
views
Changing markdown tasks checkboxes with hotkeys?
Let's say I have markdown tasks like this:
- [ ] Task
- [ ] Task
- [x] Task
- [x] Task
How could I change each task like so below, from any checkbox to any checkbox with hotkeys set for each type (x, ...
- 339
0
votes
0
answers
22
views
Issue when opening a new buffer with plugins enabled
I have a plugin stored in ~/.vim/ftplugin/vhdl that I need while writing *.vhdl code. However, I don't really need it when, say, I am writing *.v code.
With VIM I use buffers, so for instance in one ...
1
vote
1
answer
35
views
Use textobject selection with nnoremap
I hope this is not an XY problem, but I need the following thing: I have parameterized markdown fences (in vimwiki), i.e:
```c
int a = 5;
printf("%d", 5 <++>)
```
So my idea is when ...
- 87
1
vote
1
answer
391
views
Connect vim-dadbod with postgres instance running in docker without having to install postgres locally
Some context. I am running postgres on my local machine using docker compose. Together with the compose is also pg-admin, but I want to avoid having to open pg-admin all the time and started looking ...
- 31
0
votes
1
answer
37
views
Neovim commands or plugins for an equvialent of the :s command with different regex syntaxes
I would want a different regex syntax, like JS regex for instance, with a command for or like :s/ commands.
- 339
0
votes
1
answer
533
views
Any Neovim plugins for formatting Markdown text? [closed]
I started learning Vim because I spend too much time formatting text right in Markdown editors. Vim motions help a lot with that, but I still want hotkeys or motions to format text in markdown to bold ...
- 339
3
votes
1
answer
403
views
Neovim: with auto-session, how can I restore Neotree's position to where it was before closing Neovim?
I have no idea what I'm doing, When I just have nvim and Auto session setup individually and I quit Neovim, auto session restores a blank window in place of Neotree. I have this snippet in my init.lua ...
- 339
1
vote
2
answers
844
views
Can I open Neotree in the current window instead of in a new one?
When I do a command like :Neotree reveal it opens it in a new window on the left, when I want to it to show in the current window and hide the buffer that was there.
- 339
0
votes
1
answer
90
views
How to identify names of lua configuration variables to inspect them?
I load a plugin, and the plug docs tell me that I can configure it using lua code like this, which I might put in my startup file:
lua require('plugin_name').setup{
\ foo ...
- 123
-1
votes
1
answer
373
views
Vim plugin: indentLine, not showing indent guides for bash file (no shebang) just named [file].bash [closed]
Plugin: indentLine
I'm not getting indent lines for bash files (and Java files but not important as I use IntelliJ), using this plugin, it only shows indent lines for Python
I installed using ...
- 200
0
votes
1
answer
938
views
How to configure pylsp installed by Mason with lsp-zero for nvim?
I want to disable a specific error/warning - E203.
This is my lsp.lua where I tried to add ignore config according to this doc from lsp-zero git
local lsp = require("lsp-zero")
lsp.preset(&...
- 101
0
votes
1
answer
84
views
Why is the order of functions in the tagbar different from the C source file?
When opening C/C++ source code in Vim, if you open the tagbar plugin, the display order of functions in the tagbar is different from the display order in the C/C++ source file. I wonder why.
- 165
1
vote
1
answer
73
views
How to change color scheme in a csv plug-in?
I learnt from this post that there is a csv plug-in. I tried this plug-in and it indeed arranged the csv file well.
However, the color scheme is horrible on my screen.
Is there anyway that I can ...
- 43
0
votes
0
answers
37
views
Install coc.nvim on Raspberry Pi 4B on Pi OS
I have successfully installed vim and two plugins on my raspberry pi 4b with Pi OS (linux). But when I installed coc.nvim vim gave an error (error code 1) and then showed erratic behaviour. Am I doing ...
- 101
3
votes
1
answer
473
views
How do you pass options to a lua plugin?
In many Neovim plugins these days, configuration is done in a new way, and the readme just says to "pass option_name = someval to enable some behaviour". For example, archibate/nvim-gpt, ...
- 846
0
votes
1
answer
3k
views
Unable to use Nvim-dap with codelldb
I am trying to configure neovim with nvim-dap to debug C++ code.
I was thinking about using the codelldb debugger, so I installed it via Mason
My configuration looks like this:
local dap = require(&...
- 53
1
vote
1
answer
628
views
Cannot make vim-markdown conceal the formatted text
I am quite new to Neovim, just installed some of the important plugins and now I wanted to make it really good for writing Markdown files. I installed vim-markdown for that, and followed the ...
- 53
1
vote
1
answer
1k
views
How to install nvim-html-css neovim plugin in NvChad
Neovim plugin: nvim-html-css
I don't know lua but I need this plugin installed for bootstrap classes. I have Neovim NvChad lazy.nvim setup. Copy pasting didn't worked so I tried to cut out maybe ...
- 23
1
vote
1
answer
505
views
How to fix RGB / RGBA colors not being shown as colors in neovim nvChad lazy.nvim colorizer plugin?
I can see color on those:
#000000
red
But not on those:
rgb(0,45,65);
rgba(2,45,23,1);
Here is C:\Users\user\AppData\Local\nvim\lua\plugins\init.lua file colorizer code that comes preinstalled with ...
- 23
1
vote
2
answers
158
views
Is there a Vim plugin for testing VimScript patterns?
I'm new to VimScript and trying to learn how to construct patterns.
Is there a Vim plugin like RegExr.com for testing patterns?
- 31
0
votes
2
answers
535
views
How to run a callback when an nvim plugin is loaded. Can I tie this back to running a callback when a plugin is required/imported?
I can see in vim how we can:
Call function only when the plugin is loaded
But I want to:
Call function only when the plugin is required
- 812
1
vote
1
answer
125
views
Using marks in custom functions/plugins without changing user's marks
I am looking for a way to save and restore marks at the beginning and end of my custom Vimscript function. I am writing a plugin and I don't want my plugin to change any of the user's marks, so I ...
- 65
0
votes
0
answers
15
views
Help me remove feature in NVim [duplicate]
I've just used NVim lately and install some plugins Plugin List
And every function have some params name behind it . Anyone know where this comes from and how to remove it ? Thanks!
- 1
-1
votes
1
answer
386
views
Why is Vim telling me that 'no plugin to install' when I have installed a plugin manager (vim-plug)?
call plug#begin()
plug 'https://github.com/AndrewLockVI/dark_ocean.vim'
plug 'https://github.com/ErichDonGubler/vim-sublime-monokai'
plug 'https://github.com/rafi/awesome-vim-colorschemes'
call plug#...
- 11
0
votes
0
answers
126
views
Dynamic load plugin when using Neovim?
I want to dynamically load the local plugins when using Neovim.
For example, there are some directories ~/plugin1 and ~/plugin2 (they're colorscheme plugins).
When using Neovim, I try to add ~/plugin1 ...
- 237
3
votes
1
answer
788
views
How can we know if we can install a plugin on both Vim and Neovim?
I find in neovimcraft a list of Neovim plugins
Can we install them inside Vim or gVim?
It seems that the plugins in vimawsome can be installed on Neovim but not always in Vim.
Is that correct?
How can ...
- 385
1
vote
1
answer
2k
views
"Error detected while processing TextChangedI Autocommands for "<buffer=4>":" ParInfer Neovim [closed]
I'm setting up parinfer plugin for lisp development in neovim.
I've installed neovim plugin using below code -
use 'gpanders/nvim-parinfer'
And I've also setup below configuration
-- parinfer options
...
0
votes
1
answer
338
views
Can I make a new mode in Nvim?
I want to create a new mode other than normal, visual, or insert because I want to:
change the functions of all keys at once
allow remapping
preserve the mappings of other modes and retrieve when go ...
- 63
0
votes
0
answers
124
views
Display lint info in vim ruler
I've installed the vim-flake8 plugin and it works correctly to lint Python in vim.
When I am on a particular line, I can use :call flake8#Flake8ShowError() and it will display the error in the vim ...
- 101
0
votes
1
answer
424
views
Go to file with gf from :terminal
I often keep a :terminal open on the right of a vertical split, and on the left keep a window open for files:
------------------------------
| | |
| file buffers | :terminal ...
- 159
2
votes
1
answer
896
views
Minimap config in lua
Sorry if the question looks dumb, is it possible to set the config file of minimap in lua ?
I test the following, but the plugin is not found (the package command works wheel eg. Minimap or ...
- 143
0
votes
0
answers
16
views
mattn/vim-gist plugin selecting single file from multi file gist
Using the https://github.com/mattn/vim-gist/ plugin, is it possible to open a specific file from a gist that has more than on file?
I'm asking because Visual Code Studio lets me select an individual ...
- 101
1
vote
2
answers
284
views
Follow mode in ViM?
Emacs has a neat built-in feature called Follow mode, which splits the screen an then lays out the current buffer linearly across these splits (and follows along when scrolling). As such, one may ...
- 215
1
vote
0
answers
390
views
Help setting up init.lua in Neovim, I'm a new user and don't understand the structure for plugins
First of all, I'm not a programmer, but a musician. I just happen to (kind of) know how to use the terminal, and I use a music notation/engraving program called LilyPond that works in the terminal.
...
- 111
0
votes
1
answer
786
views
PlantUML preview doen't work
Environment
macOS Ventura on M1
iTerm2
Homebrew
Google Chrome
I have tried to install a PlantUML-Preview in (Neo)Vim with this plantuml-previewer.vim plugin.
I've addressed the following ...
- 1
2
votes
1
answer
182
views
Separate virtualenv for vim plugins and application code
I have multiple vim plugins (ropevim, taskwarrior etc.) which depend on python libraries. These libraries are installed in system python3
When I am working on a python project, the virtual environment ...
- 143
1
vote
0
answers
44
views
What vim plugin is hijacking my session to give me grep information I don't want?
I'm not sure how better to phrase this question. I have not recently installed anything new—in fact I'm a bit overdue to upgrade my three-year-old Linux Mint install—but in the last couple months I ...
- 111
0
votes
1
answer
725
views
How can I install fzf in vim without using a plugin manager? [duplicate]
I have fzf installed in manjaro (/usr/bin/fzf, /usr/share/fzf), but I can't seems to figure out how to install fzf for vim. I'm having trouble following these instructions: https://github.com/junegunn/...
- 389
1
vote
1
answer
2k
views
How to configure Neoformat to use Prettier?
Installed Neoformat with Plug in init.vim for Neovim 0.7.2 on Linux Mint 19.3
I can't figure out how to get Neoformat to work with Prettier.
I installed Prettier as a snap package in --devmode, so ...
- 11
1
vote
2
answers
200
views
Gvim Python loading issue (despite being correctly installed)
I found a lot of questions about it, some problem was about 32 or 64 bit, other was about python support compiled in vim, etc.
None was my case.
Preamble: Software installed
I installed Python on ...
- 289
2
votes
3
answers
433
views
Add a Semicolon Automatically in C With a Vim Plugin
I am a C programmer and I am looking for a plugin that automatically adds semicolons when necessary before writing changes to a file.
For example, look at the following example.
printf("%s\n"...
- 271
3
votes
1
answer
2k
views
nvim (plugged with coc, coc-clangd) is showing parameters for every function. How do disable it?
my nvim (plugged with coc + coc-clangd) is showing the paramters for every function, how do I disable it ?
I'm using a common vimrc for vim and neovim, but this problem only happens in neovim.
FILE *...
- 131