Questions tagged [plugin-vim-plug]
Questions about vim-plug: a minimalist plugin manager.
49
questions
0
votes
1
answer
26
views
How to install vim-treesitter?
I have installed neovim, it was cool so I installed vim-treesitter plugin.
I'm trying to use it but I get some error message.
I can't find solution about it.
Could you help me?
This is the error ...
0
votes
0
answers
33
views
Cannot install vim plugin due to git problem
I'm on MacOS Big Sur with nvim 0.7.2,vim-plug, and git 2.37.1 installed.
I succesfully installed vim-crystal (to enable syntax highlighting for Crystal codes) by doing this:
Edit ~/.config/nvim/init....
1
vote
2
answers
148
views
Check if VimPlug is installed in .vimrc
I'm trying to have a .vimrc that is portable between machines. Some computers I use have VimPlugin installed, while others don't. On the ones with VimPlug, I'd like to do some setup using call plug#...
0
votes
1
answer
208
views
How can I remove vim-plug, so I can migrate to Packer?
I upgraded to neovim, and I want to remove vim-plug. It randomly changes my style settings (literally turns on syntax on for no reason other than the author's preference), and it's not as nice as ...
1
vote
0
answers
188
views
Sorry, the command is not available in this version
I am trying to install the UltiSnips plugin using vim-plug (for everything else, vim-plug works just fine). I put this:
call plug#begin('~/.vim/plugged')
Plug 'sirver/ultisnips'
call plug#end()
...
0
votes
0
answers
58
views
Vim Plug installment error on MacOS: Error creating directory /Users/api/.vim/autoload
I just migrated today from VSCode to Vim, and I need a little bit of help regarding the installation of Vim Plug.
I installed Vim with Homebrew, and now I want to install Vim Airline. The tutorial I ...
3
votes
2
answers
357
views
Call plugin-defined function in .vimrc
I use tpope/vim-fugitive and airblade/vim-gitgutter and I want to selectively enable gitgutter only in git repositories.
Since vim-fugitive provides FugitiveIsGitDir which returns 0 or 1, this could ...
1
vote
0
answers
69
views
:PlugUpdate is required every time I open vim [closed]
I’m setting up my LaTeX environment for vim, but the snippets (Ultisnips + vim-snippets + Gilles Castel’s tex.snippets with some changes) only work after I run :PlugUpdate (using vim-plug). I have to ...
1
vote
1
answer
106
views
Sourcing (a very tiny) vimrc changes iskeyword
I'm having a hard time understanding how set nocompatible (a line which, from this answer on StackOverflow, I understand I could also remove from my ~/.vimrc, correct me if I'm wrong), syntax enable ...
0
votes
1
answer
254
views
VimPlug#begin in both vimrc and init.vim?
I'm new to neovim settings. I'm migrating from vim to neovim. My question is described in the comment below, (*).
In ../init.vim I have:
set runtimepath^=~/.vim runtimepath+=~/.vim/after
let &...
2
votes
1
answer
419
views
Can using Vim-plug and Vundle together cause any issues in downloaded plugins?
I am completely new to vim and have to download few plugins. I had initially downloaded some using Vundle and now want to get more using vim-plug. I fear this may cause (version?) issues if I happen ...
0
votes
0
answers
654
views
Vimplug fails to install tabnine. Remote moves between counting objects and compressing them
My vimrc is moving between
remote: counting objects (1/1) and
remote: compressing objects (4538/4538) constantly.
I ran "PlugUpgrade | PlugClean | PlugInstall | PlugUpdate" in vimrc, and ...
2
votes
1
answer
2k
views
Dracula theme not recognized in init.vim
Here is the tutorial I am trying to follow
Here is the init.vim file I have written.
I just don't understand why I am getting the error
Cannot find colorscheme 'dracula'
This error is occurring in ...
2
votes
2
answers
111
views
Can vim-plug write plugin settings directly to .vimrc?
I am new in using vim-plug. It works fine installing and updating all the plugins configured in .vimrc. But some plugins require some additional settings inside .vimrc to work correctly.
Is there a ...
3
votes
1
answer
344
views
How to install plugins into 2 different folders in ~/.vim directory
Currently, I am trying to create a ~/.vimrc file that I will be able to integrate into any environment and get all my configs with minimum user interference.
In order to simplify my vim configuration. ...
0
votes
0
answers
305
views
Gruvbox theme for Airline resets every time Vim closes
I have installed gruvbox using vim-plug, then I installed Airline and set the theme following the recommendations. But every time I close Vim and open it, the theme for Airline is reset to default and ...
1
vote
1
answer
559
views
How do I set a final size to a split in vim
I fond out how to resize a split on the fly in Vim but I would like to have a fixed size to some split (like the NERDTree split it always has the same size). So basically I am using Vim Plug as a ...
1
vote
1
answer
136
views
Nvim +UpdateRemotePlugin +qall gives me error: Abort trap 6
(neovim/vim beginner)
After having ran upgrade homebrew I get error when I run nvim +UpdateRemotePlugins +qall. Anyone here knows how to get over this problem?
Anyone here knows how to get over ...
2
votes
1
answer
744
views
Order in runtimepath of Vim packages or similar plug-in managers
Vim packages work by updating 'runtimepath' to include the top directories of the plug-ins in each package (and also the after/ directory), but the Vim documentation on packages isn't absolutely clear ...
3
votes
1
answer
472
views
Can you use plugins inside of your vimrc?
I recently learned the very hard way that vim-plug will only load plugins AFTER the vimrc is completely sourced: https://stackoverflow.com/questions/21322520/why-wont-vim-recognise-a-plugin-command-in-...
3
votes
1
answer
7k
views
VimPlug, Vim won't load plugins: E117: Unknown function : plug#begin;
On Macbook Pro, Terminal, standard Vim, VimPlug
When I start vim I get the following message:
Error detected while processing /Users/me/.vimrc:
line 159:
E117: Unknown function: plug#begin
In my ....
1
vote
2
answers
565
views
Plugin management on Windows?
I am really new to vim and have been trying to use it more over the past months. Issue is I cannot get the plugins to work, I have followed the steps on vim plug github and some other sites.
I am on ...
2
votes
1
answer
2k
views
vim-plug: install plugins on startup not working properly on Ubuntu
per the recommendation in the vim-plug wiki: https://github.com/junegunn/vim-plug/wiki/extra, I've added the following snippet to my vimrc:
" Install missing plugins on Vim startup
autocmd VimEnter *
...
0
votes
0
answers
2k
views
coc not working in latest vim
I've installed coc following the instruction, using Vim-Plug (before that I did it without installing yarn and with kite still (partially) installed. I got a 'javascript file not found' error So I ...
1
vote
1
answer
653
views
Same plugins for every .vimrc file (vim-plug)
I have a question regarding the following situation:
I want to use a default .vimrc and a vimrc (name it .vimrc2) for a special purpose.
However, when I start vim with
vim -u ~/.vimrc2
I have the ...
1
vote
2
answers
53
views
Unable to conditionally test for presence of a plugin command & invoke it
I have the following code in my vimrc
if exists(":Goyo")
augroup LatexGoyo
autocmd!
autocmd BufReadPost,BufNewFile *.tex Goyo
augroup END
else
augroup LatexColumnSet
...
1
vote
0
answers
124
views
Vim-plugin error which goes away when using sudo
After resisting for a bit, I decided to try the plugin manager vim-plug.
It seemed to work well when installing the GhostText plugin, except that I had to do the installation in a sudo nvim session, ...
1
vote
1
answer
6k
views
Vim-Plug: Can't install plugins. Invalid plug directory
I'm new to vim. The problem happens when I type :PlugInstall I get:
[vim-plug] Invalid plug directory: /Users/joqsan/.vim/plugged. Try to call plug#begin with a valid directory
This is how I ...
4
votes
1
answer
2k
views
Detecting whether colorscheme is available [duplicate]
How can I detect whether a color scheme installed via a vim-plug plug-in is available?
For context, I'm trying to automate my Vim setup on a new machine, pulling the vimrc from a git repository. The ...
2
votes
2
answers
371
views
How do I pass a full filepath to a function in a Vim plug-in?
I have an exe program that checks for certain errors in a text file.
I want to create a shortcut (like \+M) to run that exe file against the text file.
My exe file's path is C:\Users\xyz\Documents\...
3
votes
1
answer
232
views
What are suggested ways to modify a plugin that was installed by vim-plug?
Suppose there is a particular plugin that I wanna tweak part of its functionality (and it is not under active development anymore), I'd like to test the modified version without pushing to my forked ...
2
votes
1
answer
939
views
Why does `vim-plug` add the .vim file to .vim/autoload and not .vim/plugin?
I am new to Vim plugins and am looking to use the vim-plug plugin manager. The installation instruction advises me to download the .vim file and add it to ~/.vim/autoload.
curl -fLo ~/.vim/autoload/...
1
vote
0
answers
228
views
Vim Plugin Path Issue
I'm trying to get Vim all decked out with some fancy plugins on my work laptop but I am running into some issues.
Using echo &rtp I can see that Vim will look in several directories for startup ...
4
votes
1
answer
1k
views
How can I list the plugins currently *active* when using VIM-Plug?
Oftentimes I'll want to put remaps in my .vimrc that use plugin commands. When a plugin happens to not be installed, these remaps will result in errors. A simple workaround would be to put an if-...
2
votes
1
answer
6k
views
How to install fzf.vim with Vundle?
I use Vundle to manage my vim plugins. However I just came across fzf, and its installation instructions require that I use vim-plug.
How do I make this happen? Wouldn't there be a conflict between ...
1
vote
1
answer
2k
views
vim not loading vim-plug plugins
Vim is not loading vim-plug plugins. When I run vim and do :PlugInstall, it installs the plugins and applies them:
This is what happens when I quit vim-plug interface using :q, vim goes back to ...
3
votes
1
answer
1k
views
Using Vim-Plug with portable version of gvim (windows)
My university does not (quite understandably) provide administrative rights to users on their public machines (which run only MS Windows 7 OS). As a regular vim user, I use a lot of plugins (...
3
votes
0
answers
7k
views
Can't make vim-plug work [closed]
I'm using Ubuntu 17.04. I've decided to start using Vim, so I needed a plugin manager. I found vim-plug and I really liked it. But I can't make it work. I followed the installation guide:
curl -fLo ~/...
0
votes
3
answers
2k
views
Sourcing Vimplug plugins in a separate file
Installing plugins through vim-plug involves putting the following code inside the vimrc file.
call plug#begin('~/.vim/plugged')
Plug 'user/repository'
call plug#end()
I install a lot of plugins, ...
1
vote
2
answers
3k
views
Neovim: plugins installed but not working
I am using Ubuntu 16.04. I installed Neovim using apt-get. I downloaded the plug.vim script & put it into the autoload folder in ~/.config/nvim. I put the following in my init.vim:
call plug#...
7
votes
2
answers
6k
views
VimPlug unknown function plug#begin in NeoVim
Recently I decided to switch from Vundle to VimPlug, and I noticed that after installing it...
putting the plug.vim in my autoload directory ~/.vim/autoload/
and making sure that my vim and neovim ...
3
votes
1
answer
10k
views
Why won't vim-plug install my plugins? [typo] [closed]
I'm pretty new to Vim and vim-plug and I can't get the latter to install my plugins.
I think I've set everything up—see my files below. But when I start Vim and enter :PlugStatus, it shows a blank ...
5
votes
2
answers
997
views
Can I get vim-plug to skip installing a plugin, based on some Vimscript condition?
I'm using vim-plug for managing plugins, primarily for its lazy-loading capabilities. This lets me do:
Plug 'Valloric/YouCompleteMe', { 'do': 'python2 ./install.py --clang-completer --gocode-...
2
votes
1
answer
897
views
Unable to start Vdebug
I am unable to start Vdebug. I am using Vim-Plug to handle my plugins, :PlugStatus on a PHP file gives a status of OK. However, when I press F5, Vdebug is not started.
Does anyone has any idea what ...
9
votes
1
answer
2k
views
What does an `autocmd User` do?
I switched to vim-plug recently. In the README, there's this snippet for using YouCompleteMe with vim-plug:
" Code to execute when the plugin is loaded on demand
Plug 'Valloric/YouCompleteMe', { 'for'...
1
vote
0
answers
406
views
Conceal not working with tex files and vim-plug
Normally, :syn match Entity "e" conceal and :set conceallevel=3 results in all es being concealed. But, if I use vim-plug, this does not work in a tex-file …
1
vote
1
answer
217
views
How can I stop a system ftplugin file from overriding the keybindings from a plugin I manage via vim-plug?
I am using the merlin plugin for Ocaml and right now I set the runtimepath by hand, as per their installation instructions:
call plug#begin('~/.vim/plugins')
"other plugins go here...
call plug#end(...
21
votes
3
answers
20k
views
What's the correct way to install YouComplete using vim-plug in vim/nvim?
The only documentation for installing YCM seems to be for Vundle and I'm fairly new to vim-plug and plugins in general so I'm not sure how well it translates to vim-plug.
4
votes
1
answer
2k
views
How to load plugins from my vimrc and from another file?
I have my dotfiles synchronized on github which is a current practice.
As I use several machines I want to be able to have some part of my configuration not synched on my github repo. To do so I ...